Product ID:TARGET CUP WHEELS
MSDS Date:11/25/1985
FSC:3640
NIIN:00F016254
MSDS Number: BKGCC

FEDERAL-MOGUL CORP., TARGET PRODUCTS DIVISION

4320 CLARY BLVD.
KANSAS CITY, MO 64130

Emergency Phone: (816) 923-5040

Info Phone: (816) 923-5040

Cage: 9U240

FEDERAL-MOGUL CORP., TARGET PRODUCTS DIVISION

KANSAS CITY, MO 64130

Telephone: (816) 923-5040

Cage: 9U240

ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICON CARBIDE

CAS: 409-21-2

RTECS: VW0450000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

PHENOLIC RESIN, PHENOL FORMALDEHYDE RESIN

CAS: 9003-35-4

ACGIH TLV: 10 MG/CUM

FURFURAL (SARA III)

CAS: 98-01-1

RTECS: LT7000000

OSHA PEL S, 5 PPM

ACGIH TLV: S, 2 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

CRYOLITE, SODIUM ALUMINUM FLUORIDE

CAS: 15096-52-3

RTECS: WA9625000

OSHA PEL 2.5 MG/CUM

ACGIH TLV: 2.5 MG/CUM

POTASSIUM FLUOBORATE

CAS: 13755-29-8

RTECS: ED2975000

OSHA PEL 2.5 MG/CUM

ACGIH TLV: 2.5 MG/CUM

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9192

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
EXPOSURE TO DUSTS MAY CAUSE RESPIRATORY PROBLEMS, SKELETAL OR
DENTAL FLUOROSIS.
Explanation of Carcinogenicity:NOME
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: EXPOSURE TO
DUST MAY CAUSE RESPIRATORY PROBLEMS, SKELETAL OR DENTAL FLUOROSIS.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS

First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Spill Release Procedures:NORMAL CLEAN-UP

Handling and Storage Precautions:AVOID BREATHING GRINDING DUST &
CONTACT W/SKIN & EYES. AVOID STRONG ACIDS OR BASES.
Other Precautions:COOLANTS MAY PRODUCE OTHER DECOMPOSITION PRODUCTS.
DUST FROM WORKPIECE WILL BE SIGNIFICANTLY GREATER THAN FROM
GRINDING WHEEL.

Respiratory Protection:USE NIOSH-APPROVED DUST RESPIRATORS AS REQUIRED
TO MAINTAIN EXPOSURE Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP DUST LEVELS Protective Gloves:LEATHER, CLOTH, OR RUBBER/VINYL
Eye Protection:GOGGLES OR SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:APRON & FACE SHIELD
Supplemental Safety and Health
REFER TO ANSI B7.1 REGARDING SAFETY REQUIREMENTS FOR USE, CARE, &
PROTECTION OF ABRASIVE WHEELS.

Spec Gravity:>1
Appearance and Odor:SOLID & MAY PRODUCE ODOR IN USE.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES

Waste Disposal Methods:DISPOSE OF BY SANITARY LANDFILL IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.